Adobe Photoshop cc - Essentials Training Course Part-2

                                                 ( Adobe Photoshop cc - Essentials Training Course Part-1)

Types Of type layer

(I). Horizontal type tool:- We can type the text horizontally.

(II). Vertical type tool:- We can write text vertically.

(III). Horizontal mast tool:- With the help of this command we can write horizontal text and
         can apply Filter where as we cannot apply filter command on text written with type tool.

(IV). Vertical mask tool:- We can write vertical text.

11. Resterize:- This command is used to selected shape layer mask layer type layer etc in to bitmap

      layer, without changing mask layer type layer i to bitmap layer we cannot apply filter.

12. Group layer (Ctrl+G):- With the help of this command we can create group of our selected layer.

13. Ungroup layer (Shift+Ctrl+G):- With the help of this command we can ungroup the group layer.

14. Hide Layer:- With the help of this command we can hide our selected layer.

15. Arrange:- With the help of this command we can arrange the layer.

        (I). Bring the front (Shift+Ctrl+])

       (II). Bring forward (Ctrl+])

      (III). Send backward (Ctrl+[)

      (IV). Send to back (Ctrl+Shift+[)

16. Align and distribute:- With the help o this command we can give alignment to the selected layer

      E.g:- Align left, Align right, Align top etc.

17. Lock layer:- With the help of this command we can lock the our selected layer when and after

      that we cannot move the layer.

18. Link layer:- With the help of this command we create link in our selected layer when we move 

      our one layer all layer are move together.

19. Selected link layer:- With the help of this command we can select our link layer.

20. Marge layer:- With the help of this command we can all layer marge in one layer.

Filter Menu

1. Last filter (Ctrl+F):- With the help of this command we can use last filter in our open file.

2. Liquify (Shift+Ctrl+X):- With the help of this command we can apply effect and remove 

    extra pixels of image.

3. Artistic:- With the help of this command we can apply some artistic effect in our selected layer.

4. Blur:- With the help of this command we can apply in our selected layer.

5. Blur gallery:- With the help of this command we can apply blur gallery effect in our selected layer.
6. Distort:- With the help of this command we can distort our selected layer.
7. Noise:- With the help of this command we can apply noise in our selected layer.
8. Pixelate:- With the help of this command we can apply pixelate effect in our selected layer.
9. Render:- With the help of this command we can apply cloud , light, lens effect in our
    selected layer.
10. Sharpen:- With the help of this command we can give sharpness and highlight the pixels in our
      selected layer.
11. Sketch:- With the help of this command we can apply sketch effect in our selected layer.
12. Stylize:- With the help of this command we can apply stylize some effect in our selected layer.
13. Texture:- With the help of this command we can apply texture in our selected layer.

Image Menu

1. Mode:- With the help of this command we can change the colour mode of selected layer like

    RGB, CMYK, and Black and white.

(I). RGB:- This is used for web designing.

(II). CMYK:- This is used for print media.

(III). Black and white:- With the help of this command we can change selected image into black and

      white image.

2. Adjustment:- It is also called as colourize option . this option is used for colour setting of an image 

    or selection. E.g:- To change eye colour dress colour etc.

(A). Brightness/Contrast:- With the help of this command we can increase or decrease the 

        brightness image.

(B). Level (Ctrl+L):- With the help of this command we can change colour level of image.

(C). Curves (Ctrl+M):- With the help of this command we can change image colour.

(D). Hue/Saturation (Ctrl+U):- With the help of this command we can changes the images colour.

    E.g:- Eye colour, Lips colour, To changes dress colour etc.

           - Steps:-

                           - Select the image

                           - Click on image menu

                           - Click on adjustment

                           - Click on hue/saturation

                           - Click on colurize option

                           - Change the value

                           - Click on ok
(E). Colour balance(Ctrl+B):- With the help of this command we can change image colour according
    to given value.
(F). Black and White(Alt+Shift+Ctrl+B):- With the help of this command we can convert our colour
    Image in to black and white images.
(G). Invert (Ctrl+I):- With the help of this command we can show the opposite colour of selected
     colour object.
(H). Desaturate(Shift+Ctrl+U):- With the help of this command we can changes the image
       to grayscale and then we can changes colour through Hue/Saturation.
3. Auto tone (Shift+Ctrl+L):- With the help of this command we can changes automatically
    colour tone.
4. Auto Contrast(Alt+Shift+Ctrl+L):- With the help of this command we can change automatically
    images contrast.
5. Auto Colour(Shift+Ctrl+B):-With the help of this command we can do automatically colour.
    correction.
6. Image Size(Alt+Ctrl+I):- With the help of this command we can changes image size of file
    and canvas also get changed.
7. Canvas size(Alt+Ctrl+C):- With the help of this command we can changes the size of our open
    file.
8. Image rotation:- With the help of this command we can rotate our file horizontally vertically to
    angle.
9. Crop:- With the help of this command we can crop the selected area of image.
                - Steps:-
                              - Select the area of image using crop tool.
                              - Click on image menu
                              - Click on crop
10. Trim:- With the help of this command we can remove the extra space from the file.
                 -Steps:-
                              -Click on image menu
                              - Choose top, Bottom, Left option
                              - Click on ok.
11. Reveal all:- With the help of this command we can chow the full image.
12. Duplicate:- With the help of this command we can create duplicate of our open file.
13. Apply images:- With the help of this command we can merge the selected two files together
      but the size of both files should be same.

View Menu

1. Proof setup:- With the help of this command we can see that different colour mode of selected file
   eg:- RGB, CMYK, Black and White
2. Proof colour (Ctrl+Y):- With the help of this command we can change the colour mode of colour
    of all the colour changed using proof setup in to normal
3. Pixel aspect ratio:- With the help of this command we can select the size of file.
4. Zoom in (Ctrl++)
5. Zoom out (Ctrl+-)
6. Fit on screen (Ctrl+0)
7. Actual pixel (Ctrl+1)
8. Print size
9. Screen mode
(A). Standard screen mode:- With the help of this command we can do work in normal view or layout
      in this mode there are other tools like box, property menu etc. Which we can show.
(B). Full screen mode with menu bar:- In this mode there are only toolbox, property bar
        available and we can see selected file only.
(C). Full screen mode:- In this mode we can see only file in full screen and all other menu get hidden
 10. Extra (Ctrl+H)
11. Show:- With the help of this command we can show or hide, guides, selection edges,
      master guide slice etc.
(A). Grid (Ctrl+")
(B). Guide (Ctrl+,)
12. Rular (Ctrl+R)
13. Snap (Shift+Ctrl+;)
14. Snap to:- We can snap to any guide grid layer slice after switching on this option guides layer
      etc get touched with selected object. 
15. Lock guides (Alt+Ctrl+;):- We can lock the guide line position.
16. Clear guide:- We can clear our inserted guideline.
17. New guide:- We can insert new guideline by giving horizontal or vertical position.
18. Lock slice:- We can lock or unlock our slice position.
19. Clear slice:- We can clear the slice.

Window Menu

1. Arrange:- With the help of this command we can arrange our file in window cascade tile format.

(A). Cascade

(B). Tile

(C). Float in window:- We can float or separate selected file from window.

(D). Float all in window:- We can float our all window.

(E). Consolidate all to tab:- We can arrange all open files window on tab.

(F). Match zoom:- We can match the zoom location of our all open files.

(G). Match location:- We can match the location of our all open files.

2. Workspace:-

(A). Save workspace:- With the help of this command we can save all opened plate like colour, layer

     Gradient character, etc. with any name.

(B). Default workspace:- With the help of this command we can open all plate.

(C). Keyboard shortcut or menu:- With the help of this command we can change the 

     shortcut command and we can also hide menu command.

3. Action(Alt+F9):- This option is used to record the work performed e.g:- To record filter we 

    can also record to make same background.

    - Steps:-

-Click on window menu

- Click on action

- Click on create new set

- Give the set name

- Click on ok

- Click on create new action

- Give action name 

- Click on ok

- Do the work and after that stop recording

- If you want to play on play button.

4. Adjustment:- With the help of this command we can do image adjustment like colour, Brightness

    etc.

5. Brushes:- With the help of this command we can shoe or hide brush library window.

6. Channels:- With the help of this command we can show or hide colour channel.

7. Colour (F6):- With the help of this command we can shoe or hide colour window.

8. Character:- With the help of this command we can do text formatting.

9. Histogram:- With the help of this command we can see our file graph.

10. History:- With the help of this command we can see the cursor location.

11. Info(F8):- With the help of this command we can see the cursor location.

12. Laye(F7):- With the help of this command we can show or hide layer window.

13. Navigator:- With the help of this command we can zoom on or zoom out our file.

14. Paragraph:- With the help of this command we can do paragraph setting in our open file.

15. Path:- With the help of this command we can shoe or hide path window.

16. Style:- With the help of this command we can use some pre-defined style in our selected object.

17. Swatches:- With the help of this command we can use some colour swatches in our 

      selected object.

18. Option:- With the help of this command we can show or hide option window.

19. Tools:- With the help of this command we can show or hide tool plate.

File Menu

1. New (Ctrl+N)

2. Open (Ctrl+O)

3. Open as smart object:- With the help of this command we can open our any file as a smart 

    object file.

4. Open recent

5. Close (Ctrl+W)

6. Close all (Alt+Ctrl+W)

7. Save (Ctrl+S)

8. Save as (Shift+Ctrl+S)

9. Save as for web (Alt+Shift+Ctrl+S)

10. Revert:- We can remove unsaved work in our file.

11. Import

12. Export

13. Automates:- With the help of this command we can change mode, size etc.

14. File info (Alt+ShiFt+Ctrl+I)

15. Page setup (Shift+Ctrl+P)

16. Print (Ctrl+P)

17. Exit (Ctrl+Q)

  

Thank You So Much

If any question please put the comment I will replay